Article 24 — Road, Rail, Inland Waterway Transport: Inland Waterway Transport Document Requirements
Introduction
UCP 600 Article 24 establishes the specific requirements for road, rail, and inland waterway transport documents presented under documentary credits. Inland waterway transport documents have unique characteristics compared to ocean or air transport documents. This guide examines the regulatory framework, failure scenarios, and resolution process for inland waterway transport document requirements.
Failure Mode Analysis
Failure 1: Inland Waterway Transport Document Does Not Indicate the Place of Dispatch
The credit specifies dispatch from "Port of Rotterdam" but the inland waterway transport document does not indicate this location. Article 24(b) requires the place of dispatch.
Failure 2: Document Does Not Show the Date of Shipment
The inland waterway transport document is missing the date of shipment. Article 24(c) requires the date to be indicated.
Failure 3: Document Is Not Signed by the Carrier
The inland waterway transport document is unsigned. Article 24(d) requires the document to be signed by the carrier or the carrier's named agent.
Failure 4: Document Shows the Wrong Destination
The credit specifies destination "Port of Antwerp" but the document shows "Port of Brussels." Article 24(b) requires the destination to match the credit.
Deterministic Resolution Architecture
Step 1: Identify the Inland Waterway Transport Requirements
Review the credit for specific requirements: place of dispatch, destination, date, and carrier.
Step 2: Examine the Document Against Article 24 Requirements
Verify the document indicates: acceptance for carriage, place of dispatch and destination, date of dispatch, and carrier signature.
Step 3: Check Consistency with Other Documents
Verify that the dispatch and destination on the transport document are consistent with the invoice, certificate of origin, and other stipulated documents.
Step 4: Issue a Discrepancy Notice
If the document fails any Article 24 requirement, issue a refusal notice under Article 16.
Step 5: Request a Corrected Document
The beneficiary must obtain a corrected inland waterway transport document from the carrier.
Step 6: Verify the Corrected Document
The examining bank verifies the corrected document and confirms compliance.
Step 7: Confirm Compliance and Proceed
Upon confirmation, the bank proceeds with payment, negotiation, or acceptance as applicable.
Conclusion
Inland waterway transport documents have specific requirements under UCP 600 Article 24. Practitioners must understand these requirements and ensure the document complies with the place of dispatch, destination, date, and signature requirements.
FAQ
Does an inland waterway transport document require an on-board notation?
No. Article 24 does not require an on-board notation. The document indicates "dispatched" or "taken in charge" rather than "shipped on board."
Can an inland waterway transport document be issued by a freight forwarder?
Yes, if the freight forwarder acts as the carrier or the carrier's named agent. The document must bear the carrier's signature or the agent's signature on behalf of the carrier.
What if the credit specifies a particular carrier?
If the credit names a specific carrier, the document must be issued by that carrier. Presenting a document from a different carrier is a discrepancy.
Does the place of dispatch need to be a port?
The place of dispatch should be a specific location as indicated in the credit. It may be a port, a warehouse, or another location on the inland waterway.
Is a copy of the inland waterway transport document acceptable?
Only if the credit permits copies. If the credit requires originals, copies are not acceptable.
Source Notes
Context only. The source dossier returned the following sources for this topic. The underlying query was: "article 24 road rail inland waterway multi-family documentary credit site:iccwbo.org"
- Commentary on UCP 600 — ICC (Published 02 Aug 2019)
-
Context: The ICC Commentary provides official interpretation of Article 24 and addresses the specific requirements for inland waterway transport documents.
-
UCP 600 - Including eUCP Version 2.1 — ICC (Published 31 Jul 2023)
-
Context: The full text of UCP 600 establishes the inland waterway transport document requirements under Article 24.
-
Uniform Rules for Documentary Credits (UCP 600) - eBook — ICC Academy (Published 12 Dec 2024)
-
Context: The UCP 600 text provides the primary source for inland waterway transport document requirements.
-
Certified UCP 600 Specialist (CUCP) — ICC Academy (Published 12 Jul 2025)
- Context: The CUCP certification covers inland waterway transport document requirements as a core competency area.
UCP 600 Article 24 establishes the specific requirements for road, rail, and inland waterway transport documents presented under documentary credits.
| Regulation | Article / Section | Requirement | Consequence |
|---|---|---|---|
| UCP 600 | Article 24 | Road, Rail or Inland Waterway Transport Documents | Binary determination (compliant/discrepant) |
| UCP 600 | Article 16 | Discrepant Documents, Waiver and Notice | Binary determination (compliant/discrepant) |
← Scroll horizontally to see all columns
Quick Reference Summary
- No reference captured.
Compliance Checklist
Get the Full LC Compliance Checklist
15-point pre-submission checklist covering UCP 600, ISBP 745, and SWIFT MT700 fields. Free PDF download.
No spam. Unsubscribe anytime.
DraftLC generates compliant Article 24 — Road, Rail, Inland Waterway Transport — so you never face this failure mode.
DraftLC drafts your LC with UCP 600-compliant terms and flags conflicts during drafting — before documents reach the bank.
No credit card required · See how DraftLC drafts compliant credits